Buying a new furnace may not be a concern right away. But it’s wise to learn the things that will likely impact your choice when you’re ready to buy. Here are seven things you’ll want to think about when it’s time for furnace replacement in Fort Myers.
1. Size and Installation Quality
To run at peak efficiency and comfort, your furnace must be correctly sized for your home. When it comes to furnaces, bigger is certainly not better. We often get requests from customers to purchase a big furnace in the mistaken belief that a larger furnace is either more reliable or will offer better comfort.
The opposite is true. Large furnaces will short cycle, or continuously turn on and off. This leaves you cold, with higher energy bills and a furnace that could need replacing much sooner.
This is why it’s crucial to work with the right company when purchasing a new furnace. Even if it’s the correct size but improperly installed, the U.S. Department of Energy says you could forfeit as much as 30% of your energy efficiency.
Another crucial component of installation is ductwork. If yours is old or designed wrong, you might have issues with noise or comfort. A furnace is only as effective as the duct system it’s attached to.
At Service Experts Heating & Air Conditioning, our Expert HVAC technicians are ACE certified, which means they’re skilled in repairing and installing various types of home comfort systems. In addition to technical skill, our technicians are also trained in treating you fairly. We also support our work with a 100% satisfaction guarantee for a year.*
2. Energy Efficiency
Furnaces are ranked by a term called AFUE, or annual fuel utilization efficiency. Like miles per gallon on cars, this rates the annual gas consumption of a furnace. The higher the number, the less gas is spent during the heating process.
If your present furnace is 15 years old, it’s likely rated well below 80 AFUE. As an example, if your HVAC system is 70 AFUE, you’re wasting up to 30 cents of each dollar you spend on heating.
Here’s how AFUE ratings work now:
- 80 AFUE—minimum efficiency rating in the U.S. and Canada.
- 90 AFUE—ENERGY STAR® rating for furnaces in the U.S. South.
- 95 AFUE—ENERGY STAR® rating for furnaces in the U.S. North and Canada.
- 98 AFUE—best efficiency rating available.
3. Blower Motor Technology
As you research new furnaces there is one more important thing to consider: blower technology. This part moves air throughout your home. And it also consumes a lot of electricity, so it’s essential to be familiar with your options.
There are three types of blowers available on furnaces today. They include:
- Standard blower motor. Furnaces that aren’t ENERGY STAR rated have a traditional blower motor that’s been relatively unchanged for the past 30 years. This motor is the least expensive and also the least energy efficient.
- Constant torque motor. This technology strikes a balance between cost and energy efficiency. It provides an electrical efficiency boost over a standard motor design.
- Variable-speed motor. The most energy-efficient furnaces can run at different speeds. Instead of operating at full blast 24/7, they will quietly operate at a low or medium speed at times. This helps improve your comfort while keeping energy costs down, both in the winter and summer. And it also keeps indoor humidity in check.
4. Sound Reduction Technology
Sound has become a very important consideration with furnace installation, so another dramatic improvement has been keeping noise under control. Some of these features include:
- Sealed and insulated cabinets
- Variable-speed blower technology
- Whisper-quiet gas burners
With this technology, you might not even be aware that your furnace is on.
5. Smart Thermostat
You probably use a programmable thermostat, but chances are you probably aren’t making the most of your energy savings. These thermostats can be complicated to program, particularly if your schedule varies from day to day.
A smart thermostat removes all the guessing about energy efficiency. Many models can pick up on your temperature preferences and then create an energy-saving schedule to match. They also know when you’re home or away and will adjust your heating and cooling as necessary.
As an extra perk, you’ll also be able to keep tabs on and adjust your settings from just about anywhere on your phone. Some models can even alert you if they detect a problem with your furnace or remind you when it’s time to replace your air filter.
There’s a major difference in furnace quality and reliability. Like any large purchase, we think it’s best to go with a major brand name. With a leading brand like Lennox® or Goodman®, you’ll have more confidence in the technology and that the manufacturer will uphold its product warranty over the long haul.
Furnaces usually have two main warranty coverage areas:
- Heat exchanger. This is the center of the furnace and the costliest component to replace. This part typically has a 20-year limited warranty or lifetime limited warranty, but this can differ based on the manufacturer and furnace model.
- Main parts. This includes the blower motor, electronic controls, ignitors and other key parts. Warranties can vary from as short as a one-year limited warranty to as long as a 10-year limited warranty.
When reviewing warranty coverage, it’s important to know it's limited. So, you should make sure you understand the restrictions. For example, nearly all standard manufacturer warranties only include the cost of the replacement part, not labor. And labor on a replacing heat exchanger could get costly.
Once your new furnace is installed, make sure you complete the product registration right away. Many manufacturers may reduce the warranty term if the product registration is not completed. This step is easy and typically only takes a few minutes.
How much does all this cost anyway? It could range from $1,700 for a basic furnace, or $5,500 or more for a high-efficiency model.
As you think about these costs and the impact to your budget, keep in mind that unlike nearly every other appliance you may need to purchase, your new furnace may help pay for itself from the monthly energy savings it provides.
A couple of other ways to save include:
- Replacing your air conditioner simultaneously.
- Purchasing at the ideal time, such as in early fall, mid-winter and early spring. You may be able to get extra discounts and rebates during this slower season.
- Take advantage of rebates from the federal and state government, as well as from your local utility company. We can help you figure out this process.
- Finance your new furnace or sign up for our exclusive HVAC Advantage Program™. For just one low monthly fee, you’ll get a new furnace with repairs and maintenance included.*
How Do I Know When to Replace My Furnace?
Now that you know what to look for in a new furnace, when should you replace your outdated one? Here are a few ideas from our Experts that will help you make that decision.
Heating systems typically last 15–20 years. How long yours will keep going depends on whether you’ve done furnace maintenance, where you live and your desired temperature. If you’re in a place with harsh winters, your furnace will run more frequently, potentially making it wear out faster. The same goes if you like to keep your home at a warmer temperature.
Repair Frequency and Cost
Just like any appliance, as furnaces get older, the potential for frequent furnace repair increases. If your system is more than 15 years old, those repairs can be particularly expensive. Common and expensive repairs on an older furnace include:
- Blower motor failures
- Ignition control failures
- Heat exchanger failures
If repairs are more than the half the cost of a new furnace, it’s generally recommended to replace it.
Furnaces older than 15 years can be extremely inefficient. You could be wasting as much as 30% of the money you spend to keep your home warm. Excessive energy costs and the desire to decrease energy consumption are also strong reasons to think about replacing your furnace. In fact, an independent study by Decision Analyst shows nearly 20% of homeowners who recently replaced their furnace specifically did so to reduce their utility bills.
Trust Your Furnace Replacement to the Experts
It can seem overwhelming trying to research furnace features on your own. Or recognize exactly when you should replace your furnace. Our Service Experts Heating & Air Conditioning Experts are here to make the process much easier. Call us at 239-908-6991 or schedule an appointment online to book your free home comfort assessment today.
*For HVAC Service Memberships, certain warranty exclusions and limitations apply. See your signed agreement for full terms and conditions. For the Advantage Program™, please see your signed Advantage Program Agreement for full details and exclusions. Lease with approved credit; visit ServiceExperts.com for details.